Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods (ISO 1172:2023)

This document specifies two calcination methods for the determination of the textile glass and mineral filler content of glass-reinforced plastics: —     Method A: for the determination of the textile glass content when no mineral fillers are present. —     Method B: for the determination of the textile-glass and mineral-filler content when both components are present. This document is applicable to the following types of material: —     prepregs made from yarns, rovings, tapes or fabrics; —     SMC, BMC and DMC moulding compounds; —     textile-glass-reinforced thermoplastic moulding materials and granules; —     filled or unfilled textile-glass laminates made with thermosetting or thermoplastic resins. The methods do not apply to the following types of reinforced plastic: —     those containing reinforcements other than textile glass; —     those containing materials which do not completely burn off at the test temperature (for example, those based on silicone resin); —     those containing mineral fillers which degrade at temperatures below the minimum calcination temperature.
ΚΩΔΙΚΟΣ ΠΡΟΪΟΝΤΟΣ: CYS EN ISO 1172:2023
€40.00
This document specifies two calcination methods for the determination of the textile glass and mineral filler content of glass-reinforced plastics: —     Method A: for the determination of the textile glass content when no mineral fillers are present. —     Method B: for the determination of the textile-glass and mineral-filler content when both components are present. This document is applicable to the following types of material: —     prepregs made from yarns, rovings, tapes or fabrics; —     SMC, BMC and DMC moulding compounds; —     textile-glass-reinforced thermoplastic moulding materials and granules; —     filled or unfilled textile-glass laminates made with thermosetting or thermoplastic resins. The methods do not apply to the following types of reinforced plastic: —     those containing reinforcements other than textile glass; —     those containing materials which do not completely burn off at the test temperature (for example, those based on silicone resin); —     those containing mineral fillers which degrade at temperatures below the minimum calcination temperature.