Wind turbines - Protective measures - Requirements for design, operation and maintenance
This European Standard specifies requirements for protective measures relating to the health and safety
of personnel, relevant to commissioning, operation and maintenance of wind turbines.
It does not describe instructions and provisions for safe working during manufacture, transport, assembly
and installation of the wind turbine.
Requirements are specified regarding
– hardware provisions being a part of the turbine such as platforms, ladders, lighting,
– manuals and warning signs to accommodate safe and quick operation, inspection and maintenance.
The requirements and/or measures specified account for the hazards
– of mechanical origin such as falling, slipping, locking in,
– of thermal origin (fire) such as burns by flames or explosions,
– of electricity such as contact with live parts,
– generated by noise such as stress and loss of hearing,
– generated by neglecting ergonomic principles in machine design such as unhealthy postures or human
errors.
This standard is prepared for horizontal axis, grid connected wind turbines. For other concepts (e.g.
vertical axis turbines) the principles are still valid, but the specific rules or requirements have to be
adjusted to the actual concept.
Additional provisions and procedures are necessary for turbines installed in water or offshore. The present
document only draws attention to these.
Provisions and procedures for lifts and Suspended Access Equipment (SAE) in the turbine tower are not
included in this standard.
This standard is not applicable to wind turbines manufactured before the date of its publication by
CENELEC.
ΚΩΔΙΚΟΣ ΠΡΟΪΟΝΤΟΣ:
CYS EN 50308:2004
This European Standard specifies requirements for protective measures relating to the health and safety
of personnel, relevant to commissioning, operation and maintenance of wind turbines.
It does not describe instructions and provisions for safe working during manufacture, transport, assembly
and installation of the wind turbine.
Requirements are specified regarding
– hardware provisions being a part of the turbine such as platforms, ladders, lighting,
– manuals and warning signs to accommodate safe and quick operation, inspection and maintenance.
The requirements and/or measures specified account for the hazards
– of mechanical origin such as falling, slipping, locking in,
– of thermal origin (fire) such as burns by flames or explosions,
– of electricity such as contact with live parts,
– generated by noise such as stress and loss of hearing,
– generated by neglecting ergonomic principles in machine design such as unhealthy postures or human
errors.
This standard is prepared for horizontal axis, grid connected wind turbines. For other concepts (e.g.
vertical axis turbines) the principles are still valid, but the specific rules or requirements have to be
adjusted to the actual concept.
Additional provisions and procedures are necessary for turbines installed in water or offshore. The present
document only draws attention to these.
Provisions and procedures for lifts and Suspended Access Equipment (SAE) in the turbine tower are not
included in this standard.
This standard is not applicable to wind turbines manufactured before the date of its publication by
CENELEC.